Road Paver Finisher
Road Paver Finisher is designed and developed as per industry leading standards. The plant is used for laying wet mix macadam & dry lean concrete in line. Owing to its excellent performance and cost effectiveness, the equipment is used at various construction sites. The paver finisher is the user friendly solution that ensure trouble free and noiseless operation.
All controls are conveniently grouped together for easy operations. Hopper and screed assembly are raised by the hydraulic cylinders. The hopper capacity is about 4 cu.mtr. Hydraulically lifted hoppers ensure complete emptying and continuous feeding of mix to mechanically driven conveyor chain while changing fee tippers. designed to lay of wet mix and bituminious mix (Dual Appication) material up to 200 mm thickness. Maximum travelling speed is 16 km/hr. for shifting from one site to another.
At the front, the frame has an oscillation cross member with push roller which pivots around a central vertical point, thus ensuring that the Paver finisher travels straight forward even if the supply vehicle is not in perfect alignment with the machine when filling the hopper.
Particular attention has been given to the design to ensure the earliest possible maintenance and adjustment of transmission and final drive to screed and driving wheels. Each adjustment is made independently of the other. The entire screed assembly can be readily removed from the Paver for cleaning and servicing.
|Equipment Model||WWP – 450 HES (DUAL APPLICATION)|
|Operating height||3000 mm|
|Shipping height||2280 mm|
|Operating Width||3100 mm|
|Shipping Width||2860 mm|
|Truck dumping Clearance||600 mm|
|Wheel Base||2500 mm|
KIRLOSKAR 4R 1040T/
ASHOK LEYLAND – ALU 6.65
|Engine Output||105 HP @ 2200 RPM|
|Battery||12 VOLTS (HEAVY DUTY)|
|Tires – Front 2 nos.||SOILD TYRE OD 22” X ID 16” X W 12”|
|Tires – Rear 2 nos.||PNEUMATIC TYRE 12.00 X 20.00 – 18 PLY|
|Paving Thickness||10 – 200 mm|
|Paving speed||1.25 – 23 MTRS|
|Paving Width||2.5 MTRS – 4.5 MTRS|
|Type of screed||HYDRAULICALLY EXTENDABLE SCREED|
|Travel Speed||0 – 16 KMPH|
|Hopper Capacity (Approx.)||4 CUBIC METRE|
|Fuel Tank Capacity||120 LTRS|
|Hydraulic Oil Tank Capacity||80 LTRS|
|Auger Diameter||300 mm|
|Screed Vibration||0 to 2000 PER MINUTE|
|Crown||-1 to +3|